car periodic care tips for cooling system

1. Check the position of the radiator cap and check the water in the radiator of your car on a regular basis because if reduced would result in over heating;

2. Do not fill the radiator overflow, but fill up to a top position only. Auto parts such as Radiators that are too full of negative impact on engine cooling system components;

3. If the radiator requires the addition of water regularly every few days or even every day, immediately go to your mechanic;



4. Replace / drain water in the radiator of your car within a period of 1 year or every 20,000 km for regular maintenance and water pump cooling system of your car:
Always use coolant / coolant / inhibitors is good, safe for aluminum parts and has a phosphate content of the low / nil, say Procoor, Revkogel, glyco Shell, etc.;

Mixing water coolant should use aquades / distilled water to prevent the crust on the engine cooling system; Dispose of the wind on the radiator and the engine coolant through the channels, until the air bubbles disappear;

5. Check the engine cooling fan and air-conditioning, whether it is still running normally or it will become slow spin;

6. Check with your mechanic to find the cause of delay in the cooling fan rotation.

Attention:

1. Removing the thermostat result in decreased engine performance, fuel consumption and reduced endurance / durability of the engine;

2. Use a thermostat that begin to open at a temperature of 83 degrees Celsius. This thermostat can be obtained at the official Peugeot garage and specially designed by the manufacturer for machines Peugeot vehicles in the tropics;

3. The use of coolant will extend component life due to its cooling system to prevent rust / corrosion, lubricates the water pump and raise the boiling point of water;

4. Fan (electric fan) which rotates continuously at high speed indicates irregularities in the cooling system or the pressure of refrigerant / freon;

5. Engine cooling and air conditioning systems in modern cars use a computer (ECU) as bitron special. Modification of the cooling fan in a way to change the jumper or thermoswitch can result in errors in the information and decision-making engine ECU because Bitron always in communication with the engine ECU.

Automotive Cooling system Aspects

1. Basically the car engines have a normal working temperatures (normal operating temperature) in the range of 85 degrees s / d of 95 degrees Celsius;

2. Car engine became overheated at a temperature of 110 degrees Celsius (over using the original radiator cap and use a liquid/coolant);

3. Occasionally the engine temperature reaches 100 degrees Celsius in certain circumstances (e.g on a hill which is very heavy and long) in a relatively short period of time can be categorized as normal (for using the original radiator cap and use a liquid/coolant);

4. Any type / form of modifications to make the machine working temperature is cooler than normal temperatures that range from 85 degrees s / d of 95 degrees Celsius is always likely to have a negative impact engine performance and durability;



5. Especially for older types, the normal working temperature of the engine slightly lower, i.e in the range of 80 degrees s / d of 90 degrees. However, overheating is also only occurs at a temperature of 110 degrees Celsius (over using the original radiator cap and coolant);

6. Especially for the type equipped with automatic transmission, the engine to working temperature range is maintained at a maximum of 95 degrees Celsius in order to maintain the durability of the automatic transmission and other auto parts.