How to turn on and heats up the carburetor engine

1. Hit the gas pedal to get stuck one time to activate the auto-choke;
2. Off the gas pedal and turn the machine on;
3. The machine will rotate at a slightly higher rotation (depending on outside air temperature) since the auto choke and fast idle at work;
4. After 10 seconds, if the engine speed is still too high, stepped on the gas pedal suddenly by about 1 / 2 steps to disable the fast idle;
5. Start the vehicle slowly as the EFI engine.
* If the vehicle is still equipped with the manual choke, you have to pull it manually and try to start the engine before you have to step on the gas pedal until the end of a time as well;
* On the machine berkarburator (especially those still using manual choke), if the outside air temperature is cold (eg in the mountains in the morning), you have to shuffle the gas pedal 2-3 times before trying to turn the machine

heating auto machines

Basically, a well-maintained modern car machines only require heating in place within a very short time. Heating time at a place only about 10 seconds at temperatures above 20 degrees Celsius. If the air temperature is below that, the heating time may be added in place for about 10 seconds. Warming the engine about 2 s / d 3 minutes only required if the air temperature touching freezing aka 0 degrees Celsius or below it.





Heating in place of a lingering negative impact far more than its positive impact:
1. Contaminate the home environment;
2. Wasting gasoline ;
3. Engine requires a mixture of air and gasoline (Air Fuel Ratio or A / F Ratio) rich (rich) in the round of stationary / idle. 14,7:1 ideal mixture, known as lambdha = 1 is very difficult to achieve on the conditions of stationary lap / idle. The result is clear, rich mixture would accelerate the formation of carbon crust on the intake valve and combustion chamber of your favorite engine.